{"id":1731,"date":"2018-01-06T17:01:52","date_gmt":"2018-01-06T22:01:52","guid":{"rendered":"http:\/\/www.darrenbrant.com\/?p=1731"},"modified":"2025-06-27T13:56:41","modified_gmt":"2025-06-27T17:56:41","slug":"press-bed-assembled","status":"publish","type":"post","link":"https:\/\/www.darrenbrant.com\/?p=1731","title":{"rendered":"Press Bed Assembled"},"content":{"rendered":"

Got the bolts for the press bed and motor and assembled the frame of the press.<\/p>\n

\"Frame<\/a>
Frame and bed guides assembled on my Wright Combination press.<\/figcaption><\/figure>\n

When the press was originally disassembled 25 years ago by the original owner, instead of properly removing the motor wiring they just cut the wire. They cut it in the worst place too.<\/p>\n

\"Wire<\/a>
Wire to motor cut<\/figcaption><\/figure>\n

I had thought of rewire the entire press but instead decided to splice the cut with some 12 gauge electrical wire. It isn’t pretty but it functions now.<\/p>\n

\"Motor<\/a>
Motor wire spliced.<\/figcaption><\/figure>\n

Now to figure out the size and material of the press bed.<\/p>\n","protected":false},"excerpt":{"rendered":"

Got the bolts for the press bed and motor and assembled the frame of the press. When the press was originally disassembled 25 years ago by the original owner, instead of properly removing the motor wiring they just cut the wire. They cut it in the worst place too. I had thought of rewire the […]<\/p>\n","protected":false},"author":1,"featured_media":1732,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[19],"tags":[121],"class_list":["post-1731","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-printmaking","tag-etching-press"],"aioseo_notices":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/frame-and-bed-guides-assembled-scaled.jpg?fit=4592%2C2576&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/pUgG3-rV","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":1727,"url":"https:\/\/www.darrenbrant.com\/?p=1727","url_meta":{"origin":1731,"position":0},"title":"Attaching Frame to Press Base","author":"db","date":"January 5, 2018","format":false,"excerpt":"I ran into some problems attaching the main frame to the press base. Sometime during the 25 years the press was disassembled either the frame got bent or the guides on the press base did. Either way the frame was 3mm too small to fit the base. With some bar\u2026","rel":"","context":"In "Printmaking"","block_context":{"text":"Printmaking","link":"https:\/\/www.darrenbrant.com\/?cat=19"},"img":{"alt_text":"Attaching the frame to the base of my Wright Combination press.","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/press-frame-574x1024.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/press-frame-574x1024.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/press-frame-574x1024.jpg?resize=525%2C300 1.5x"},"classes":[]},{"id":475,"url":"https:\/\/www.darrenbrant.com\/?p=475","url_meta":{"origin":1731,"position":1},"title":"Re-assembling My Letterpress","author":"db","date":"March 6, 2012","format":false,"excerpt":"My letterpress has been sitting in the basement in pieces since I moved it. I finally stopped procrastinating and started to reassemble it. It went better than I expected. I started by placing the platen on the floor\u00a0roughly\u00a0where I thought I wanted the press. \u00a0That thing is too heavy for\u2026","rel":"","context":"In "Artist Blog"","block_context":{"text":"Artist Blog","link":"https:\/\/www.darrenbrant.com\/?cat=26"},"img":{"alt_text":"partially reassembled letterpress","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2012\/01\/partially-reassembled-letterpress.jpg?fit=640%2C853&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2012\/01\/partially-reassembled-letterpress.jpg?fit=640%2C853&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2012\/01\/partially-reassembled-letterpress.jpg?fit=640%2C853&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":1690,"url":"https:\/\/www.darrenbrant.com\/?p=1690","url_meta":{"origin":1731,"position":2},"title":"Moved the Press","author":"db","date":"September 1, 2017","format":false,"excerpt":"Moved my press bits into the attic. What I need to do now is build a base for it and cut a piece of plywood for the press bed.","rel":"","context":"In "Artist Blog"","block_context":{"text":"Artist Blog","link":"https:\/\/www.darrenbrant.com\/?cat=26"},"img":{"alt_text":"wright combination etching press disassembled in attic","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2017\/09\/wright-combination-etching-press-disassembled-in-attic-574x1024.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2017\/09\/wright-combination-etching-press-disassembled-in-attic-574x1024.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2017\/09\/wright-combination-etching-press-disassembled-in-attic-574x1024.jpg?resize=525%2C300 1.5x"},"classes":[]},{"id":1752,"url":"https:\/\/www.darrenbrant.com\/?p=1752","url_meta":{"origin":1731,"position":3},"title":"New Press Bed","author":"db","date":"February 19, 2018","format":false,"excerpt":"For my press bed I went down to the local building center and picked up a sheet of 5\/8\" particle board laminated front and back with melamine. It just fits on the bed rollers. I think it will wonder side to side when I'm pulling a print, so I may\u2026","rel":"","context":"In "Artist Blog"","block_context":{"text":"Artist Blog","link":"https:\/\/www.darrenbrant.com\/?cat=26"},"img":{"alt_text":"Printing press bed","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/02\/write-combination-press-bed.jpg?fit=800%2C449&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/02\/write-combination-press-bed.jpg?fit=800%2C449&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/02\/write-combination-press-bed.jpg?fit=800%2C449&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/02\/write-combination-press-bed.jpg?fit=800%2C449&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":262,"url":"https:\/\/www.darrenbrant.com\/?p=262","url_meta":{"origin":1731,"position":4},"title":"Fixing My Galley Letterpress","author":"db","date":"February 15, 2011","format":false,"excerpt":"I bought this Challenge rolling pin type galley press at auction many years ago for $60 Canadian. I'm in the middle of home renovations and it was in the road, so I had to disassembled it to stuff it into my car. Here it sits in pieces next to my\u2026","rel":"","context":"In "Artist Blog"","block_context":{"text":"Artist Blog","link":"https:\/\/www.darrenbrant.com\/?cat=26"},"img":{"alt_text":"challenge Galley rolling pin letterpress","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2011\/02\/challenge_Galley_rollingpin_letterpress1.png?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2011\/02\/challenge_Galley_rollingpin_letterpress1.png?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2011\/02\/challenge_Galley_rollingpin_letterpress1.png?resize=525%2C300 1.5x"},"classes":[]},{"id":1721,"url":"https:\/\/www.darrenbrant.com\/?p=1721","url_meta":{"origin":1731,"position":5},"title":"Building a Press Stand","author":"db","date":"January 4, 2018","format":false,"excerpt":"I started building my press stand with wooden columns my wife found on kjiji. They had already been cut in half, so I trimmed the ends off to remove a bit of rot and even up the lengths. They might still be a bit long, but I figure I'll set\u2026","rel":"","context":"In "Printmaking"","block_context":{"text":"Printmaking","link":"https:\/\/www.darrenbrant.com\/?cat=19"},"img":{"alt_text":"Building a stand for a Wright Combination press","src":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/pressstand-1024x712.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/pressstand-1024x712.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/pressstand-1024x712.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.darrenbrant.com\/wp-content\/uploads\/2018\/01\/pressstand-1024x712.jpg?resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/posts\/1731","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1731"}],"version-history":[{"count":2,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/posts\/1731\/revisions"}],"predecessor-version":[{"id":1736,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/posts\/1731\/revisions\/1736"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=\/wp\/v2\/media\/1732"}],"wp:attachment":[{"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1731"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1731"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.darrenbrant.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1731"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}